Layout-driven duct assessment
The remodel layout is checked against existing duct routes, registers and returns, and the duct changes the new layout actually requires are listed — no more, no less.
This is renovation-supporting work, not a standalone heating and cooling service. When a remodel opens walls, moves rooms or changes layouts, ductwork often has to move, resize or seal with it — and that work is scoped inside the remodel, while walls are open and inspections are already scheduled. This page explains that supporting scope honestly, and what it does not cover.

During a remodel, ductwork modification means rerouting, resizing, extending or sealing ducts to serve a changed layout: a moved kitchen or bathroom, a new room, a converted garage or an opened wall that exposes existing ducts. Duct leakage testing is required on alteration work under Title 24, and HERS rater verification applies where the alteration triggers it — both are scoped into the remodel rather than treated as extras. Standalone heating and cooling installation, repair and servicing are not part of this scope.
Duct costs inside a remodel vary by layout change, duct length, sealing scope and verification triggers; pricing is set out in a written estimate after the site visit. The supporting scope below is what a remodel's written estimate should itemise for ductwork.
Ductwork inside a remodel covers the supporting stages below. A heating or cooling system replacement, a new system installation, or a repair call is a different scope and is not covered here.
The remodel layout is checked against existing duct routes, registers and returns, and the duct changes the new layout actually requires are listed — no more, no less.
Ducts are rerouted around new walls, resized for changed rooms, and extended into additions or conversions where the remodel scope calls for it.
Duct joints and connections are sealed as a system, since leaking ducts waste conditioned air into attics and wall cavities.
Duct leakage testing is carried out as Title 24 requires on alteration work, with results checked against the applicable standard for the scope.
Where the alteration triggers HERS verification — for duct leakage, airflow or fan measures — a HERS rater is budgeted into the remodel, not discovered at final inspection.
Registers and returns are set for the new layout, airflow is checked room by room, and the duct scope is walked against the remodel's written scope.
The remodel layout and existing ducts are assessed together, and the duct changes the layout requires are written into the remodel scope.
Duct work follows the remodel's LADBS permit path, with mechanical inspection points scheduled alongside framing, plumbing and electrical.
Ducts are rerouted and sealed while walls are open, and leakage testing is carried out before finishes cover the work.
HERS verification is completed where the alteration triggers it, before finishes close the relevant work.
Registers and returns are set for the new layout, airflow is checked, and the duct scope is walked against the remodel scope.
The remodel layout and existing ducts are assessed together, and the duct changes the layout requires are written into the remodel scope.
Duct routes are planned from the new layout, with runs kept short and straight where the structure allows, so airflow reaches the rooms it serves.
Joints, connections and penetrations are sealed as a system, since a single unsealed joint can waste the sealing done elsewhere.
Duct leakage is measured, not guessed, so the remodel's Title 24 compliance is demonstrated rather than assumed.
Room-by-room airflow is checked after registers are set, so a moved room is not left starved of conditioned air.
Ducts are protected and capped during demolition and drywall work, so debris does not enter the system before handover.
Sherman Oaks remodel ductwork often follows kitchen and room-layout changes in Valley homes, where ducts must reroute around opened walls and new rooms while the remodel's inspections are already scheduled.
Studio City remodel ductwork often serves whole-home and addition scopes, where new rooms and changed layouts require duct extensions, sealing and leakage testing inside the larger project.
Where this work fits in Los Angeles: Sherman Oaks · Studio City · Encino · Woodland Hills · Van Nuys · Northridge.
Ductwork fails when it is treated as an afterthought to the remodel. These are the problems to scope for.
Ask a pro →A moved wall or new room without a duct plan leaves rooms starved of air. Duct layout is drawn from the new layout, not the old one.
Ducts sealed after drywall cannot be tested or fixed properly. Sealing and leakage testing happen while walls are open.
Verification triggers that surface at final inspection delay handover. Triggers are identified during remodel scoping, with a rater budgeted in.
Where the remodel reveals a system that needs replacement rather than duct modification, that is a separate scope with its own licence and permit path — it is not folded into ductwork silently.
Radiant Renovations Co. holds a 4.8-star aggregate rating. No review count is published here, and no individual review quotations are shown on this page — full review text is shown on Google.
No, as presented here. It is renovation-supporting work inside a remodel: duct moves, resizing and sealing that a changed layout requires. Standalone heating and cooling installation, repair and servicing are not part of this service.
Duct work inside a remodel follows the remodel's LADBS permit path, with mechanical inspection points. The exact path depends on the remodel scope — confirm it against current LADBS rules.
Duct leakage testing measures how much conditioned air escapes from ducts, as Title 24 requires on alteration work. It is carried out before finishes cover the ducts, with HERS verification where triggered.
Duct-only work is a different scope from the renovation-supporting work described here, with its own licence, permit and system considerations. Duct-only work is handled as part of a remodel, not as a separate service.
Call (424) 337-6597 to talk through your remodel's ductwork: what the new layout requires, what sealing and testing apply, and what is — and is not — inside the remodel scope. Radiant Renovations Co. is open 24 hours, 7 days a week.
Book a Walkthrough (424) 337-6597 →Call (424) 337-6597 to talk through your project. Radiant Renovations Co. is open 24 hours, 7 days a week. Tell us what you want to change and we will talk through what it takes, including the permit path for the scope.