Wall preparation
The wall is checked for flatness, soundness and prior tile or paint, and repaired or primed so tile bonds and reads flat.
Open 24 hours · 7 days a week · Los Angeles
Kitchen Backsplash Installation in Los Angeles
A backsplash is a small area with outsized visibility: it sits at eye level, behind the busiest wall in the house, and every layout mistake shows. This page explains what backsplash installation involves — layout, outlets, counter joints and grout — in Los Angeles kitchens.
Careful work. Honest options.
About this service
Kitchen Backsplash Installation in Los Angeles: What It Involves
Backsplash installation sets tile on the kitchen wall between counter and wall cabinets — or to the ceiling where the design calls for it — with layout centred on the range or sink, outlets cut cleanly, and the counter joint sealed against water. The wall must be flat and sound before tile starts, since backsplash tile over a wavy wall shows every wave in raking kitchen light.
Cost varies by tile, pattern, area and outlet count; pricing is set out in a written estimate after the site visit. The scope below is what a written estimate should itemise instead: preparation, layout, tile, outlets, grout and sealing.
- ✓ Wall flat and sound before tile
- ✓ Layout centred on range or sink
- ✓ Outlets cut cleanly, not patched
- ✓ Counter joint sealed against water
What's included
What Kitchen Backsplash Installation Covers
Backsplash scopes range from a simple subway run to a full-height feature wall. The stages below cover both.
Layout planning
Tile layout is planned from the focal point — range, sink or window — so cuts fall at edges and patterns stay centred where they matter.
Tile setting
Tile is set level and spaced consistently, with spacers or levelling systems matched to tile size and pattern.
Outlets and switches
Outlet and switch boxes are extended and cut cleanly into tile, with cover plates sitting flat over finished tile, not over grout lines.
Grout and sealant
Joints are grouted, the counter joint is sealed with flexible sealant rather than grout, and stone is sealed where the material requires it.
How it works
How Backsplash Installation Runs, Step by Step
The wall, counter, cabinets and outlets are measured, and the tile, pattern and layout are chosen with the focal point set.
The wall is repaired and primed where needed, and the layout is marked so cuts and pattern breaks are planned, not improvised.
Tile is set in sequence from the focal point outward, with spacing and level kept consistent across the run.
Outlets are fitted, grout goes in after adhesive cures, and the counter joint is sealed.
The finished backsplash is walked against the written scope, with any lipped tile or grout issue corrected before handover.
STEP 01Survey and layout decision
The wall, counter, cabinets and outlets are measured, and the tile, pattern and layout are chosen with the focal point set.
Tools & methods
Tools and Methods We Use
Wet tile saw
Tile is cut wet for clean edges, especially at outlets, corners and pattern changes where a chipped edge shows.
Layout and levelling tools
Level lines and spacers keep courses straight across long runs, even where counters and cabinets are not perfectly level.
Outlet cutting tools
Outlet openings are cut cleanly into tile so cover plates sit flat, rather than patched around with grout.
Grout and sealant finishing
Grout is applied and cleaned in stages, and the counter joint is sealed flexibly to allow movement.
Protection during installation
Counters and cabinets are protected during tile cutting and grouting, so the new backsplash does not damage the new kitchen around it.
Real results
What This Work Involves
Kitchen Backsplash Installation
What backsplash work involves in a Silver Lake home
Silver Lake backsplash work in 1920s kitchens often means period-appropriate tile — subway, handmade-look or patterned — over older walls that need flattening before tile reads true.
Kitchen Backsplash Installation
What backsplash work involves in a Los Feliz home
Los Feliz backsplash scopes range from Spanish Revival patterned tile to clean modern slabs in mid-century kitchens. In both, layout around the range and sink comes before the tile order.
Where this work fits in Los Angeles: Silver Lake · Los Feliz · Sherman Oaks · Studio City · Echo Park · Highland Park.
Problems we solve
Backsplash Problems That Surface During the Work
Backsplash failures show at eye level. These are the problems to scope for.
Ask a pro →Tile following a wavy wall
Tile set over an unflattened wall waves with it. Wall preparation comes before tile, not after the pattern is set.
Outlets landing on grout lines
Outlets that fall on grout joints look patched and sit unevenly. Layout is planned around outlet positions before setting starts.
A grouted counter joint that cracks
The counter-to-backsplash joint moves and must be sealed flexibly. Grouting it guarantees a crack.
Pattern breaks at corners and edges
A pattern started without planning breaks awkwardly at corners. Layout is drawn from the focal point before any tile is set.
Proof you can check
A Rating You Can Check
- 4.8-star aggregate rating — review text is shown on Google, with no review count published
- Open 24 hours · 7 days a week
- 352 W Martin Luther King Jr Blvd, Los Angeles, CA 90037
- Phone (424) 337-6597
Customer reviews
Reviews
Radiant Renovations Co. holds a 4.8-star aggregate rating. No review count is published here, and no individual review quotations are shown on this page — full review text is shown on Google.
It depends on the kitchen: subway tile for a classic look, large-format for a clean modern wall, patterned tile for a feature. Cleanability behind the range matters as much as appearance.
Backsplash tile alone, with no plumbing, gas, electrical or structural change, is generally cosmetic work. Moving outlets or circuits with the tile scope changes the permit path.
It depends on the kitchen design and budget. Full-height backsplashes suit feature walls and range walls; a standard run to the wall cabinets suits most kitchens.
It depends on area, tile size and pattern. Layout, setting, grout cure and sealing are separate stages, and the scope should show them rather than promise a single-day finish for every tile.
Ready when you are
Talk Through Your Kitchen Backsplash in Los Angeles
Call (424) 337-6597 to talk through your backsplash: tile, pattern, layout and how it meets your counters and cabinets. Radiant Renovations Co. is open 24 hours, 7 days a week.
Get Free Estimate (424) 337-6597 →
Request an appointment
Talk To A Los Angeles Renovations Crew
Call (424) 337-6597 to talk through your project. Radiant Renovations Co. is open 24 hours, 7 days a week. Tell us what you want to change and we will talk through what it takes, including the permit path for the scope.
Call anytime(424) 337-6597
Office hoursOpen 24 hours · 7 days a week